The WingLink
-
Stop Collecting Single-Use Collars
There's a collar for chains. A different one for bands. Another for cable attachments. One more for the landmine. Each one is a separate purchase, a separate install, and another thing rattling around in your gym bag.
The WingLink replaces all of them. Laser-cut in Canada from 1/4" heavy-duty steel, it slides onto your 2" Olympic barbell sleeve and locks in place using your existing weight plates or safety collar — no set screw, no tools, nothing extra. Four carabiner slots and two integrated band wings give you six total attachment zones on a single piece of steel.
-
Two Install Positions — Total Flexibility
Inner Position (before your plates): Slide the WingLink onto the sleeve first, then load your plates on top. The weight of the plates holds it firmly against the sleeve shoulder. Ideal for chain work and band resistance during loaded barbell movements like bench press, squat, and deadlift.
Outer Position (before your collar): Load your plates first, then slide the WingLink on last before your safety collar. The collar holds it in place on the outside.
-
Six Attachment Zones
4 Carabiner / Hook Slots Three elongated slots across the top plate and one slot on the lower body accommodate standard carabiners, snap hooks, and chain links directly. Use for powerlifting chains, cable machine handles, loading pins, landmine attachments, and any carabiner-compatible accessory.
2 Integrated Band Wings The two curved wing cutouts on the base accept resistance bands and D-ring cable handles directly. Loop a band through a wing, hook a D-ring handle onto a wing, or drape powerlifting chains over the wing profile.
What You Can Do With It
Powerlifting chains — Hook directly into the slots or drape over the wings for progressive overload on bench, squat, and deadlift
Resistance bands — Loop through the wings for accommodating resistance on any barbell movement
Cable machine handles — Hook D-ring handles directly onto the wings or clip into any slot to turn your barbell into a cable station
Landmine work — Attach landmine accessories to the slots for rows, presses, and rotational movements
Loading pins — Carabiner into any slot to hang additional weight for speciality movements
Any carabiner-compatible accessory — If it clips, hooks, or loops, the WingLink handles it
Built Like Your Other Equipment Should Be
Precision laser-cut in Canada from 1/4" heavy-duty steel. Matte black powder-coat finish resists rust, chipping, UV exposure, and the repeated impact of chain drops and loaded movements. Every WingLink is built to the same standard as all Quiver Tool Systems products.
Features & Benefits
Powerlifting chains — Hook directly into the slots or drape over the wings for progressive overload on bench, squat, and deadlift
Resistance bands — Loop through the wings for accommodating resistance on any barbell movement
Cable machine handles — Hook D-ring handles directly onto the wings or clip into any slot to turn your barbell into a cable station
Landmine work — Attach landmine accessories to the slots for rows, presses, and rotational movements
Loading pins — Carabiner into any slot to hang additional weight for speciality movements
Any carabiner-compatible accessory — If it clips, hooks, or loops, the WingLink handles it
Sold as a Pair | Fits 2" Olympic Barbell Sleeves | Weigh 2 lbs each
The WingLink is the only barbell sleeve attachment on the market with six functional attachment zones. Precision laser-cut in Canada from 1/4" heavy-duty steel and finished with a matte black powder coat, it replaces your chain collar, band peg, cable attachment adapter, and landmine collar with a single piece of steel. Slide it onto your 2" Olympic barbell sleeve — no set screw, no tools — and it's held firmly in place by your existing weight plates or safety collar.
6 ATTACHMENT ZONES — CHAINS, BANDS, CABLE HANDLES & LANDMINE — Four carabiner/hook slots (3 on the top plate, 1 on the lower body) and two integrated band wings give you six total attachment points on a single sleeve plate. Hang powerlifting chains, loop resistance bands, connect cable machine handles, and run landmine attachments — all from one product, without swapping accessories between sets.
NO SET SCREW, NO TOOLS — ZERO MECHANICAL FASTENERS — Unlike every other chain collar on the market, the WingLink requires no set screw, clamp, or tools of any kind. Place it on the sleeve before your plates (inner position) and it's held by plate weight. Place it last before your safety collar (outer position) and the collar holds it. Nothing to strip, nothing to lose, nothing to tighten.
INTEGRATED BAND WINGS — NO CARABINER REQUIRED — The two curved band wings accept resistance bands and D-ring cable handles directly. No carabiner needed. Loop a band through a wing, hook a D-ring cable handle onto a wing, or drape powerlifting chains over the wing profile for instant accommodating resistance on any barbell movement.
TWO INSTALL POSITIONS — TOTAL FLEXIBILITY — Slide on before your plates, or slide on last before your safety collar. Both fully support cable attachment, landmine setups, powerlifting chains and band work on loaded barbell movements.
CANADIAN-MADE 1/4" LASER-CUT STEEL — Precision laser-cut from 1/4" heavy-duty steel in Canada and finished with a durable matte black powder coat that resists rust, chipping, and wear. Built for the repeated loading, chain drops, and dynamic tension of serious daily training.
REPLACES 3–4 SEPARATE ACCESSORIES — Eliminates the chain collar, band peg, cable attachment adapter, and landmine collar from your setup. One product. Every accommodating resistance variation. Sold as a pair so both sleeves are ready simultaneously.
Why the WingLink exists
If you train with accommodating resistance — chains, bands, or both — you've probably built up a collection of single-use collars over the years. A chain collar here, a band peg there, a cable attachment adapter you only use occasionally. Each one does one job. Each one needs to be swapped out when the exercise changes. Each one is another thing to store, lose, or replace.
The WingLink was designed to end that. Four carabiner/hook slots handle any hook, snap hook, or chain link you throw at them. Two integrated band wings accept bands and D-ring handles directly — no carabiner needed. The flat laser-cut steel profile keeps it compact and stackable when not in use. And because it's retained by your existing plates or collar rather than a set screw, there's nothing mechanical to fail, strip, or overtighten.
It's the barbell sleeve attachment that should have existed years ago.
Who it's built for
The WingLink is designed for powerlifters, strength athletes, and home gym enthusiasts who use accommodating resistance as a regular part of their training — not as an occasional add-on. If you run chains on bench press, bands on squat, or cable attachments from your barbell, the WingLink simplifies every one of those setups without asking you to compromise on any of them.
FAQ
Does this replace my regular barbell collars? No — your safety collars still go on as normal. The WingLink works alongside them, either between the sleeve shoulder and the plates (inner position), or between the plates and the safety collar (outer position).
What size barbell does it fit? Fits 2" Olympic barbell sleeves only. Not compatible with 1" standard barbells.
Do I need any tools to install it? None. The WingLink is held in place by your existing weight plates or safety collar. No set screw, no wrench, no hardware of any kind required.
Can I use it on both sides of the bar at the same time? Yes — it's sold as a pair specifically so both sleeves are set up simultaneously for chain work, band resistance, and cable setups.
What's the difference between inner and outer position? Inner position means you slide the WingLink onto the sleeve first, then load your plates on top — the plate weight holds it against the sleeve shoulder. This works best for chains and bands during loaded barbell movements. Outer position means you load your plates first, then slide the WingLink on last before your safety collar — best for cable attachment and landmine work where you want the attachment point at the end of the sleeve.
Do chains, bands, and cable attachments come included? No — The WingLink is the sleeve attachment plate only.
Can I use all four slots at the same time? Yes — all four slots accept carabiners, snap hooks, and chain links simultaneously if your setup requires it.
How much does the WingLink weigh? Each WingLink weighs 2 lbs.
What can I attach using the band wings? The band wings accept resistance bands looped directly through them, D-ring cable handles hooked directly on, and powerlifting chains draped over the wing profile — all without needing a carabiner.
FAQs
Do I need any tools to install this?
None. The WingLink slides onto your barbell sleeve and is held in place by your weight plates or safety collar. No set screw, no wrench, no extra hardware of any kind.
Does this replace my regular barbell collars?
No, your safety collars still go on as normal. The WingLink works alongside them, either between the sleeve shoulder and the plates (inner position), or between the plates and the collar (outer position).
What size barbell does it fit?
Fits 2" Olympic barbell sleeves only. Not compatible with 1" standard barbells.
Can I use it on both sides of the bar at the same time?
Yes, that's why it's sold as a pair. One WingLink on each sleeve gives you simultaneous attachment points on both sides for chain work, band resistance, and cable setups.
Do chains, bands, and cable attachments come included?
No, The WingLink is the sleeve attachment plate only.
Can I use carabiners in all four slots at once?
Yes — all four slots accept standard carabiners, snap hooks, and chain links simultaneously if needed.
What can I attach to the band wings?
Resistance bands looped directly through, D-ring cable handles hooked directly on, or powerlifting chains draped over the wing profile — all without needing a carabiner.
Where is the WingLink made?
Designed and manufactured in Canada.